cabin interior

[Denis Kidney]

Alan,
Hope the pic is not the completed job. By the way you forgot to take the roll of blue paper away - just to the s/board side of the missing engine. And what fits in the "black hole" under the cooker apace ?.
Today Kevin and I spent a total of 8 man hours sanding down all the wood work in the two cabins. To-morrow I intend to give this wood a couple of coats of Danish Oil. Please reply immediately (anyone) if this is the wrong thing to do. [Non-text portions of this message have been removed]

 

[bbach1949]

Hello - I wouldn't use an oil in that situation. Better to use a good
varnish, like Interlux Gold Seal. Most oils aren't very durable and tend to collect
dirt. Just my opinion, Bill Bach V1071

 

[alan_critchlow]

Hello Kevin et al

That was to repair 3" hole for an ancient depth sounder sender. On
the outside there was a 6" teardrop fairing. I may have overdone the
taper to glass in the hole. I had a similar repair for a log in the
hanging locker.

I am going to use a polyurethane "varnish" on the new wood on the
inside.

Alan