Bought salon table for Luger.

[caguy]

I picked up a nice table last week for the Luger. It should fit perfectly and can be used as a drop down for an extra double berth. I came out of a Catalina 27 and has a chart map of the southern California waters. These are the before pictures I'll post the after picts in about a week after varnishing.
I also picked up the stern rail from the same C-27 and it fits the Luger perfectly. I bought it to replace the ugly 3/4" aluminum rail they installed. Now all I need is the bow pulpit. I also grabbed all of the electronics including several amp/voltage meters, switches and a couple of main switches bus bars etc. I also pulled out what looked to be a brand new gusher pump. The hose is in and out is about 1 3/4". I also removed the battery charger which was also metered. I'll be going back to pick up the stanchions is a couple of weeks.

 

[woodster]

nice find Frank....btw that work bench looks very familiar i think i have one just like it ...getting hard to find theses days.....

regards

woody

 

[caguy]

I have about 8 of them in our wood shop at school.

 

[caguy]

Here is a picture of the stern rail I took off from a C27. It fits the Luger 30 perfectly, no tweaking necessary. The old ugly, flimsy aluminum rail is still there but not for l
ong.

 

[caguy]

Here are some pictures of the bow pulpit I picked up yesterday for the Luger30. It came off from a C-27. I looks so much better than the old 3/4" aluminum one that was is on there. Took some picts of the cross section of the deck where it was mounted.