J
Joel
I recently asked some questions about bottom paint on my 1987 H23. The previous owner always used Fiberglass BottomKote and the bottom is in bery good shape. After reading the earlier responses, I decided that switching to a multi-season ablative might be the way to go. A rep from Interlux was in one of the local boat stores. I talked to him about his recommendations and he said that I should just do a light sanding with 80 grit and then apply CSC right over the exisitng BottomKote. An earlier post suggested removing it completely.He also suggested using 2 coats. Others have said to use 3 coats. With 2 coats, one gallon should be enough but for 3 coats, I'd be into a second gallon. Throw in the "alternating colors" approach and the amount to buy gets even more confusing.What would y'all do? Another week or so and it will be warm enough up here to paint (I hope).Thanks.