Boom Rollers for ISOMAT boom and mast

Status
Not open for further replies.
J

Joel

Can someone direct me to a suppler for the rollers at the ends of the boom and for the masthead? I am bringing this boat back to life after she sat for 10 years.
 
E

Ed Ryan14084

.
Jul 25, 2005
15
Oday O'Day 35 Kent Narrows, MD
Try Rigrite

Joel, Try www.rigrite.com for the parts numbers and ordering for those sheaves. Here's a link that should get you to the correct location for Isomat at their website. Ed Ryan s/v Reverie O'Day 35
 
J

js

rigrite sheaves

I replaced the mast head sheaves & spacers on my 34 w/ parts from Rigrite 2 years ago. The originals were not too bad for 20 years, but the spacers were all defunct. The sheaves are not as smooth rolling as the old ones. Took some fine sandpaper is clean them up. Actualy I plan to take the old ones, drill out the centers, fill w/ epoxy & graphite, drill them out, and reuse the old ones.
 
Status
Not open for further replies.

Top Bottom