Boarding Ladder

[MLampner]

Does anyone know a source for the boarding ladders used on the Cherubini Hunter 30' from the from the late 70's. I'd also buy a used one if anyone knows of a 30 that has retired and is being parted out.

Last fall was climbing the ladder when it let loose dropping me into the Chespaeake and it disapearing down on the bottom. I could have hung onto it but was trying to grab the glasses etc. In the end didn't matter the weld to the anchor plates had let go leaving the plates on the boat. Would rather not need to drill new holes so looking for a bolt on replacement. My marina says they have a fabricator who can make a new one that would line up.

I am a large guy so an over the transom portable isn't my first choice.

Any help will be appreciated.

 

[jorgefife]

I think I can find you one.
There is a Hunter 30 in the salvage yard I go to, I will go there tomorrow and check it out for you

 

[flhunterowner]

I need one also

I am also looking for a boarding ladder for a 77 hunter 30. I have the wood platform on the back, so I need a ladder that can be used on the stern beside the platform.

 

[jorgefife]

I will go to the yard tomorrow, couldn't do it earlier
Send a picture if you can so I can check out
There are 3 Hunters in the yard: one is a 30, one is a 36 and the 3rd. one I am not sure

 

[MLampner]

Follow Up on Ladder

I will go to the yard tomorrow, couldn't do it earlier
Send a picture if you can so I can check out
There are 3 Hunters in the yard: one is a 30, one is a 36 and the 3rd. one I am not sure

Have to check to see if I have any pictures that show a stern view, if so I will post. Mine appears to have been stock. The point of attachment to the hull was two disks with screw that bolt through and can be reached from behind the rudder post.

 

[MLampner]

Follow Up on Ladder

I will go to the yard tomorrow, couldn't do it earlier
Send a picture if you can so I can check out
There are 3 Hunters in the yard: one is a 30, one is a 36 and the 3rd. one I am not sure

Have to check to see if I have any pictures that show a stern view, if so I will post. Mine appears to have been stock. The point of attachment to the hull was two disks with screw that bolt through and can be reached from behind the rudder post.

 

[jorgefife]

I went to the yard today, and took a look at the ladder: it was no good.
The one for the Hunter 36 is in mgood shape, though!
There are a lot of other boats, with great ladders, I don't know if it will git
Here is the name, anything you need speak to Gary at 832-297-4718
Tell him Jorge recommended you; I have been going to him for 10 months now, I make it almost into a pilgrimage!

 

[jorgefife]

I meant to say " " I don't know if it will fit"
Sorry for the mistake

 

[MLampner]

Thanks the search will continue.