I had to replace the bilge pump to my 1985 Hunter 34. The old screw holes in the bilge seeped water into the bilge indicating the water level between the bilge and the outside skin of the boat is higher than the bottom of the bilge.
Need advice on how to get that water out.
I've thought of drilling a 1/4" hole in the bottom of the bilge, sticking a tube through the hole and sucking it out. But that is too scarey so will not do that.
Help!!!!
Need advice on how to get that water out.
I've thought of drilling a 1/4" hole in the bottom of the bilge, sticking a tube through the hole and sucking it out. But that is too scarey so will not do that.
Help!!!!