Thanks for the recommendation. I'll keep him in mind.Buying used: If you're not working with any broker, try Doug Weber 508-563-7136 at Kingman marine in Bourne (Cataumet). The Cape has a huge inventory of boats, but more importantly Doug is like a walking University of Sailing knowledge, from inspections to free advice, he has saved me thousands of dollars. Even long after purchase.
It's a great sail from the canal to Boston, prevailing SW wind, sailing through the harbor islands. Doug can also walk you through the decision process. The tall ships are coming to Boston July 8th, so hopefully we'll see you out there.
Hanse is better built but there are other factors.
please tell me what factors, besides possibly pricequote]
My girlfriend & I toured the Hanse line at Annapolis last fall. She felt interior was not inviting or homelike at all. The whole Euro look thing was too spartan and not for her.
I look more at the exterior lines myself, and I was especially turned off by the blunt bow of the Hanse. It appeared to me that they truncated the front 6" - 12" of the boat.
I bought my 343 new in 2007. The newer 34 is similar but I prefer the 343. There is more height in the salon (I am 6'1"). Kathy prefers the single sink along the port bulkhead of the 343 over the athwartship double sink in the 34. She also doesn't like the fact that the silverware drawer & microwave are on opposite sides of the salon in the 34. There has been a bit of discussion of the 343 vs. the 34 on the 343 site on yahoo groups.
http://groups.yahoo.com/group/beneteau343/
I have heard that there are still a couple of leftover 343's around that can probably be picked up at a significant discount.
Thanks for the kudos. and thanks for all the help. I will keep both guys in mindSo nice to see the original poster back to respond and thanks folks who helped him.
I have worked with Dick Sciuto out of Brewers in Mattapoisett. He is good at getting you info and then letting you do your own thing. When we went to look at our Ericson, he took us to the boat and then went back to his office to wait for us. It was very refreshing not to have the broker hanging over my shoulder trying to explain away every little thing I looked at.
Peter Hunt is an excellent surveyor. He was happy to spend 12 hours going over every inch of the boat on the inital survey. Luckily he had surveyed the boat from the previous owner 7 years earlier and knew of some things to look out for.
You'll like the 323. There's a 2007 at Annapolis yacht sails for 105K i believe.
Thanks, the local Catalina dealer is my neighbor. I like the C309 but like the B34 better.A friend of mine bought a larger Hanse (about 40') and has had a two year nightmare getting warranty issues sorted out. The boat is very nice when everything is working but systems have been a real problem.
I've sailed a lot of Beneteaus on charter and with a few friends. For Chevrolet type reliability (not super special but everything just works) Beneteau is a reasonable choice.
I don't have a dog in this fight as I bought from a smaller Scandinavian builder.
In that size range Catalina has three models. I'd suggest considering them if you haven't already ruled them out for some reason.
Thanks. I appreciate your input.Why not consider a Bavaria? They just came out with a new 31 footer. Next size is a 34. But, back to the Hanse vs. Beneslow. Excuse me, Beneteau. I think the fit and finish is nicer on a Hanse and I would guess it is a higher price point because it is considered to be a better built vessel. But, like someone asked, you have to ask yourself how you are going to use the boat and where you will sail it. Beneteau's are considered to be coastal cruisers and not offshore classified. If you are going to sail inland or coastal you might not need a boat built for the North Sea. But, you want to consider how long you will stay aboard, so tankage is important, size of engine might be important if offshore in rougher conditions, stowage of gear (is there a place for everyone's stuff on board for the length of time they will be sailing?). These are practical questions.
I have noticed with some Beneteau's that they cut corners on some models when it comes to things like pumps. I dealt with one 31 footer, I believe, that had one pump to do the job of several. There was a manifold under the sink with a bunch of valves. For example, the bilge pump was also the shower sump pump. You turned the valve on for the task that you wanted. You had to close the others or the pump wouldn't function for the one you wanted it to. I like to see a pump for each job that needs one. Also there was a fiberglass pan glassed into the hull. That covered up wires and plumbing so that if you ever had to get at it, you couldn't. A nightmare, I think. If you buy a boat that has panels that you can unscrew to get at all hidden parts of the boat, that makes working on them quite nice. So much to think about.
My wife probably won't be joining me but my twelve year old son said he will. That, I'm looking forward to.
I singlehand mine all the time. Have even brought her back into the slip with 3 to 4 knot cross currents, although I generally try and plan on coming in on slack tide.I have, what might be an opportunity, to buy a B37 and maybe even a better deal on a B373. Both new. Do you think as sailboats that big will be too difficult for one person?