Beneteau oceanis 350 outhaul diagram

[Lemz]

Could someone please send me a diagram of how the outhaul is rigged on a Oceanis 350

 

[cymeyer]

I googled 350 owners manual and got this from a prior post.

You should be able to download here

http://www.beneteauusa.com/community...d=52&type_id=1

The 351 manual can be used as they are mostly the same boat.

http://www.beneteauusa.com/community...d=65&type_id=1

 

[Lemz]

Hi

I have Oceanis 350 manual and looked at 351 manual. These do not show the block setup inside the boom. Regards
Tim

 

[cymeyer]

Lemz,

If you go to the owner directory of this site and put in Beneteau and 350, there are 49 owners on the site. I am sure any of them can answer your questions.

 

[joker460]

Pretty straight forward. See attached PDF.

 

[Lemz]

Thanks for the diagram but the oceanis 350 seems to have a different setup. There is no track and car on the boom to start with. Guess,I need someone with a 350 to let me know how there's is setup.

 

[Lemz]

This is all I had inside my boom when I first got my oceanis 350. It was cut at both ends so don't know how it was initially setup.

 

[joker460]

Strange. If you eliminate the track and car it should be pretty close.

This is an in mast furling?

 

[Lemz]

]This is all I had inside my boom when I first got my oceanis 350. It was cut at both ends so don't know how it was initially setup. It's not in mast furling

 

[joker460]

I came across this photo which may or may not help. Added how it would be rigged.

Best that I can come up with.

Good Luck

 

[Ron20324]

Did you consider Googleing whoever made the boom?