Antifouling paint for my tender
- Thread starter mellis18
- Start date
- Status
When I Had An Inflatible...
... I spent a lot of time and money experimenting with specialty soft bottom paint. Later, I switched to regular bottom paint salvaged from left-over boat yard trash. It worked just as well or better. FYI: this, to put in perspective, was pre-1990. so it may be only a historical footnote to your question. i have had a hard dink ever since :dance:
... I spent a lot of time and money experimenting with specialty soft bottom paint. Later, I switched to regular bottom paint salvaged from left-over boat yard trash. It worked just as well or better. FYI: this, to put in perspective, was pre-1990. so it may be only a historical footnote to your question. i have had a hard dink ever since :dance:
Re: When I Had An Inflatible...
I keep my Carib inflated all the time and use Pettit Vived with good success. A good sanding on the rubber with 60 grit and 150 grit on the fiber glass, clean and prime before applying the bottom paint.
I keep my Carib inflated all the time and use Pettit Vived with good success. A good sanding on the rubber with 60 grit and 150 grit on the fiber glass, clean and prime before applying the bottom paint.
- Status