Anchor locker cover for H31

[Tellertale]

Any idea how to get a replacement cover for a 1986 H31? Mine is about to give way.

 

[John T1594]

If the surface gel coat/fiberglass cover is still good, you can epoxy a new sheet of plywood to the under surface and make it good as new. I did this on my 1980 H30 and it was not too bad a job. Cut around the edge of the old plywood base and remove it. Cut a new piece and epoxy it in place with lots of weights to help it adhere. Then cover the surface with glass cloth and epoxy. You can leave it plain, paint it or cover with gel coat.