My 1987 Legend 37 anchor roller holds my 33 lb Bruce in such a way that my mooring line knocks it off the roller. I have a Fortress FX16 I keep stowed but am in market for anchor that seats properly on my roller and does not allow the line to get between the bow and the anchor.This model Hunter has the anchor roller that is angled along the starboard not centered. Anyone with this configuration and suggestions? I am thinking about a Delta 22 or 35 or a CQR. We don't do a lot of anchoring but I would appreciate any first hand experience. Also, whether the mooring line is attached to the port or starboard cleat or the length of the pendant doesn't make a difference and when I do pin or tie the anchor chafing is a major problem.