anchor and achor roller

T

trageharrie

.
Feb 23, 2007
17
Hallo Vega friends.I have a Bruce anchor 10 kg. But my Vega does not have an anchor roller.I guess not every type of roller will make a good mach with this type of anchor.Can anyone give an advice what roller to buy?Bob HorjusVega 3384 Voordewind
 
A

archikumm

.
Feb 4, 2006
22
Try this website, they do a realy great job.http://www.sailbase.de/0000019b6a0e06302.htmlI had mine done there. Regards
Th. Kummer - architecte EPFL/SIA - rte d\'Entre-Roches 8 - 1372 Bavoistel: +4121 866 74 23 - fax: +4121 866 74 26 - mobile: +4179 413 60 35archikum@...

Le 19 mars 2014 à 21:44, horjus2003@... a écrit :
 
P

pjacobs55

.
Oct 30, 2019
1,459
Hi Bob,I had on the Vega I used to have (Sin Tacha, now Walkabout) a Windline BRM-4.It was very satisfactory and I wish i could fit one on my present boat. It required a wooden block underneath to raise it up to the bulwark level, and was bolted through the deck to a reinforcing plate below. Launching the anchor was easy and it never bumped on the topsides. It's under Anchor Rollers at http://www.windline.comPeterwww.mostlyaboutboats.ca
 
P

pelagicasd

.
Jan 28, 2001
694
Bob, I agree with Peter, very satisfactory. They have gotten quite expensive over the years since I bought ours. Check out different suppliers as it now seems everyone is carrying Windline clones at lessor prices. Walt From: pjacobs55@...To: AlbinVega@yahoogroups.comDate: Thu, 20 Mar 2014 10:02:11 -0700Subject: [AlbinVega] Re: anchor and achor roller






Hi Bob,I had on the Vega I used to have (Sin Tacha, now Walkabout) a Windline BRM-4.It was very satisfactory and I wish i could fit one on my present boat. It required a wooden block underneath to raise it up to the bulwark level, and was bolted through the deck to a reinforcing plate below. Launching the anchor was easy and it never bumped on the topsides. It's under Anchor Rollers at http://www.windline.comPeterwww.mostlyaboutboats.ca
 
You must log in or register to reply here.

Top Bottom