Aluminum tank failure - tell me more

Status
Not open for further replies.
S

Shawn R.T. Severn

Hi Peggie: Thank you for your information on the macerator pump. In your response you mentioned that aluminum tanks fail in 2 to 5 years. A failed tank would be a very big problem on our P450. There are bulkheads over top of the tank. Heck, the hoses can't even be changed with out dismantling most of the head. What is your info based on. The concern is reinforced by an odour that is coming from a location where there is no tank or hose........
 
D

Dick McKee

We had the same problem

Shawn...go to the entry I made on 6/26 "looking for some straight answers". We had the same problem on our 95 430. The aft tank had about a dozen holes in it. We ordered a replacement AL tank from Hunter before I found out the Peggy represents a company that has about a million poly tank shapes.I've already picked out the one to replace the bow tank when it goes..Good luck... it is a real mess and quite a job to replace a leaky tnak..
 
Status
Not open for further replies.