I had the o'day distribution panel all set up with power to a 3 breaker panel. One for each 110V AC power outlet. Then I had the bright idea of installing an ELCI unit as additional protection. Sure, sounds great. Installed the shore power to the ELCI. Installed the distribution panel to the load side of the ELCI and hooked up the three breaker panel to the main o'day panel.
Time to test.
The reverse polarity light came on even without the breakers on the three way in use.
The 30 amp breaker on the main distribution panel flipped off and the reverse polarity came on.
Somewhere along the line I messed up. But before I pull everything apart, any suggestions from those that are more knowledgeable. Yes, Ill say it......HELP!
Time to test.
The reverse polarity light came on even without the breakers on the three way in use.
The 30 amp breaker on the main distribution panel flipped off and the reverse polarity came on.
Somewhere along the line I messed up. But before I pull everything apart, any suggestions from those that are more knowledgeable. Yes, Ill say it......HELP!