Has anybody drilled additional limber holes in the stringers of a 28.5? I am replacing the sole, and found a fair amount of water trapped between the stringers when I removed the old floor. I would like to drill 2 additional limber holes in each stringer where I found the trapped water. I would also like to add a limber hole to the center of the stringer that comprises the aft side of the bilge well. Seems like the existing limber holes are too far off to the sides of the stringer, and water just sits inside the stringer. It just seems to me that there should be a limber hole at the lowest point of the stringer - dead center of the bottom of the boat. Thoughts anyone?