sort of. I assumed his position for the time being. No disrespect meant. There I was… just trying to pressure wash the deck (non-skid). Found the pressure washer… and it started right up… this is great. How much trouble can one get into with a project like this? Got up top… and started to blast the accumulated dirt, soot, and crud before she gets hauled. My neighbor decided to have a bonfire a couple of days ago. He was dragging crap out of the woods just to burn… only 30’ from the boat… what a maroon! Anyway… I was moving right along with satisfactory results… when all of a sudden the 3’ wand with head came flying out of the handle like a missile… rocketing off the deck and on to the ground. Well… now I have a chip down to the glass… about the size of an eraser head. One-step forward… 2 steps back. O.K… I know what you are thinking… don’t say it! I need to make a cosmetic repair… I would like to mix in some color and get the non-skid pattern back. (Need to make a stamp of the non-skid). What is the easiest way to make this repair? It could have been worse… like the wand ending up in the galley. Regards, Boodini
