A few things about my 222 and a few update items

[48dodge]

First off, do I need another one of these when I hook up my battery? Seems like it was hooked up to the wires off the outboard (which I'm redoing). http://img.photobucket.com/albums/v96/blustig/Sailboat/100_1392.jpgHere's some of the interior after stripping the headlinerhttp://img.photobucket.com/albums/v96/blustig/Sailboat/100_1398.jpgStill have more headliner to go, but learning the best way to do it is with a pair of pliers to grip and pull, and a long handle paint scraper to help with some of the areas that are glued down a little too well.http://img.photobucket.com/albums/v96/blustig/Sailboat/100_1398.jpgA picture of the rear bulkhead. I had to join the pieces together since the middle is gone and I needed a pattern.http://img.photobucket.com/albums/v96/blustig/Sailboat/100_1401.jpgHoping to finally get around to finishing stripping off the headliner and sanding off the rest of the bottom paint. I need to get to work on my trailer soon, too. After bottom paint, I'll be setting it back down on the trailer so I can do the rest of the work.

 

[48dodge]

Just on the one side

That chainplate has only been replaced on the starboard side. It's coming out and new chainplate is going back in on both sides. My replacement piece is definitely beefy, but poorly done and just plain ugly. Also has some sharp edges on it. I hope I can find some good SS to make up something like you have.

 

[48dodge]

Bulkheads are coming out

The bulkheads are coming out and being replaced. They're all delaminated on the bottom edge. The galley is being rebuilt, too. All the other bulkheads have made their way out of the boat