Ahoy all captains, I am in serious need of foot, leech and luff dimensions of 1978 O'Day 25, centerboard, standard rig 150-155% genoas. Preferably ones using a CDI FF4 furler. Any other furling jenny would be helpful. Our boat was dismasted in a tornado and ripped the old jenny to pieces. We can't get the new sail until 4 weeks after we have the dimensions and we won't be able to take them off our boat until it is repaired, about another month. The sailing season is short enough here in the midwest w/o subtracting 2 months. Thanks in advance to all who are able to help us get bcak out on the water.
911!!! furling genoa dimensions
- Thread starter Bryan22281
- Start date
- Status
I'll get back with you.
I just went out in my 25' Oday with a sail from a 27' Islander. It was approx. = to a 150. Took dimensions and they are in my car. I plan to find a good used sail larger than the standard jib. I will follow-up with dimensions for both sails later this week.
I just went out in my 25' Oday with a sail from a 27' Islander. It was approx. = to a 150. Took dimensions and they are in my car. I plan to find a good used sail larger than the standard jib. I will follow-up with dimensions for both sails later this week.
The numbers
I measured mine a while back with intentions of selling it. This is the hank on model but here are the numbers for my 150% genoa. Luff 29' Leach 27'9" Foot 17'4" I hope this helps Seth Dixon Quiet Time 77 Oday 25
I measured mine a while back with intentions of selling it. This is the hank on model but here are the numbers for my 150% genoa. Luff 29' Leach 27'9" Foot 17'4" I hope this helps Seth Dixon Quiet Time 77 Oday 25
Similar dimensions
Brian, I measured the Genoas to both my 25's last winter. Luff 29'-9" Leach 27'-9" Foot 17'-2" These were the original hank on sails. I did not measure my furling genoa. The CDI instructions to sailmakers says "Luff deduction is 22"" r.w.landau
Brian, I measured the Genoas to both my 25's last winter. Luff 29'-9" Leach 27'-9" Foot 17'-2" These were the original hank on sails. I did not measure my furling genoa. The CDI instructions to sailmakers says "Luff deduction is 22"" r.w.landau
- Status