Our girl is on the hard having repairs made to her drive train. She sat down when Hurricane Sally blew all the water out of the marina and this damaged the shaft tube and log ( log weakened by corrosion). We are doing some cosmetic work while she is on stands. The transom has some old poorly repaired dock rash and while addressing that, we studied the gap where the upper deck joins the lower portion of the hull. Should there be visible sealant there? I will go below to check for any light showing through, as i know there are leaks somewhere in the aft sections of the boat (bulkheads rotten at the bottom), but I wanted to know how this seam was sealed. There is no rub rail.
Thanks,
Carmen
Thanks,
Carmen