2009 37' Beneteau electrical problem

[cajunsailor]

37' Beneteau 2 Cabin Layout

I have lost power to my "Cabin Lights" circuit as indicated on the wiring schematic. Some/all of the lights are not out in the head, V-Berth, and aft cabin. Is this circuit on a fuse or breaker, and if so where is it located?

thanks,

 

[DougM]

There should be a breaker on the main panel. Some of the cabin lights have individual switches, don't forget to check position. If some are working and others not, I would check the bulbs and sockets for loose or corroded contacts.

 

[cajunsailor]

thanks

There should be a breaker on the main panel. Some of the cabin lights have individual switches, don't forget to check position. If some are working and others not, I would check the bulbs and sockets for loose or corroded contacts.

Thanks alot!

 

[DJBrookster]

Sorry this is off thread but does anybody know what anode to fit to a B323 folding prop?

 

[Ron20324]

Sorry this is off thread but does anybody know what anode to fit to a B323 folding prop?

Look on the Beneteau parts site.

 

[DJBrookster]

Look on the Beneteau parts site.

Thanks I'll give it a go.

 

[DougM]

for the folding prop you might have to use a collar zinc around the shaft. The B323 shaft diameter is one inch. Try boatzincs.com.

 

[Ron20324]

37' Beneteau 2 Cabin Layout

I have lost power to my "Cabin Lights" circuit as indicated on the wiring schematic. Some/all of the lights are not out in the head, V-Berth, and aft cabin. Is this circuit on a fuse or breaker, and if so where is it located?

thanks,

wrong info/edited.

 

[Ron20324]

Sorry this is off thread but does anybody know what anode to fit to a B323 folding prop?

Are you sign up on the B323 web site?
http://www.beneteau323owners.net/