1995 35.5 Legend overall depth

[Halipeno2]

I’m in the process of documenting my boat and in the Coast Guard 5397 form they are asking for the overall depth measurement. Does anyone know?
It is not the draft, it is the distance between the railing and the bottom of the hull, where the keel meets the hull.
Thanks in advance.
Halipeño

 

[dlochner]

If you know the draft, measure from the waterline to the deck amidships, add the two measurements.

 

[JamesG161]

It is not the draft, it is the distance between the railing and the bottom of the hull, where the keel meets the hull.

I just looked at my Coast Guard Documentation.

That info is NOT included.

My CGD asked for over all depth only. Your draft is 6.5 feet.

HUNTER 35 LEGEND - sailboatdata

Jim...

 

[dlochner]

The overall depth is required to calculate the net tonnage. The Form specifically asks for the depth from the keel to the shear line. The tonnage is reported on the Documentation form along with length, beam, and depth.

https://www.dco.uscg.mil/Portals/9/DCO%20Documents/Marine%20Safety%20Center/Tonnage/CG-5397_03-21.pdf?ver=y1QmHgNatnpMUcMIp21zNw%3D%3D