1988 Mac 26D trailer hub and spindle size?

Status
Not open for further replies.
finding41

finding41

.
Nov 23, 2011
2,023
MacGregor 26D London Ontario Canada
Maybe bearing sizes too. Does anyone know these? I can't seem to find them. I want to get a spare hub and bearings. Just in case.
Just the factory trailer. Thanks.
 

Attachments

centerline

centerline

.
Mar 20, 2012
3,983
Cal 34-III, MacGregor 25 Salem, Oregon
bwyachts.com has them listed. I think its the same bearing set and hubs they have been using for years and are still using on all their trailers. get the phone number from the site and call them as its easier than trying to navigate their site for a specific part...
 
Sumner

Sumner

.
Jan 31, 2009
5,254
Macgregor & Endeavour 26S and 37 Utah's Canyon Country
The bearings on our axle that was on the Mac stock trailer (and the new ones) are standard 1-3/8" inner and 1-1/16" outer bearings that you find on most 3500 lb. axles.

I got a hub with bearings at the local parts store for about $35.00. These are very common.

Here are a couple links...

http://www.southwestwheel.com/store/p-238-545lb1e-c9.aspx

http://www.etrailer.com/Trailer-Bearings-and-Races/TruRyde/BK2-100.html

second one down here...

http://abctrailerparts.com/trailer-bearings.html

You shouldn't have a problem finding what you need local and having the hub is a good idea,

Sum

[FONT=Arial, sans-serif]============================[/FONT]

Our Endeavour 37

Our MacGregor 26-S Pages

Our Trips to Utah, Idaho, Canada, Florida

Mac-Venture Links
 
Sumner

Sumner

.
Jan 31, 2009
5,254
Macgregor & Endeavour 26S and 37 Utah's Canyon Country
finding41 said:
I just found a great deal. $20 for 2 hubs with all the fixins. Here is a link for those close to London Ont.
http://ontario.kijiji.ca/c-cars-veh...5-on-4-1-2-in-Bolt-Pattern-W0QQAdIdZ395414792
Click to expand
The number comes up right, and I wouldn't worry too much about rust on the hub itself, but you wouldn't want the races or bearings to have any at all. Did you find out how much a new hub up there would cost you?

How much is the freight on the ones you found or are they nearby?

Sum

[FONT=Arial, sans-serif]============================[/FONT]

Our Endeavour 37

Our MacGregor 26-S Pages

Our Trips to Utah, Idaho, Canada, Florida

Mac-Venture Links
 
finding41

finding41

.
Nov 23, 2011
2,023
MacGregor 26D London Ontario Canada
$80 each tax included! I found a new axle with hubs for $220 plus tax! I don't want a new axle. Yet.
No shipping costs. I'm going to go get them. There only across town. And I'm in the middle. Maybe 10 min.
 
finding41

finding41

.
Nov 23, 2011
2,023
MacGregor 26D London Ontario Canada
Post a question and in less than 24 hours you can have the answer.
It took 8 min. to drive and get the things I was asking about. Not as rusted as the add says.
I'm happy. Thanks all!
 

Attachments

Sumner

Sumner

.
Jan 31, 2009
5,254
Macgregor & Endeavour 26S and 37 Utah's Canyon Country
centerline

centerline

.
Mar 20, 2012
3,983
Cal 34-III, MacGregor 25 Salem, Oregon
in case anyone is interested the Macgregor trailer bearing and races are.....(timken numbers)
inner, L68149, and race, L68111, which is also known as set 17.....
outer, L44649 and race, L44610, which is also known as set DA4....
Seals are timken 442251.

I dont have the hub number but its good information to have in the boat file.
 
Status
Not open for further replies.

Top Bottom