1983 25' Macgregor Help

Status
Not open for further replies.
K

Ken

I justgot my boat and it is missing the fake teak trim piece that more or less divides the interior from the back, inside of the boat. Or more simply put....The board that surrounds the Keel Winch. I was wondering if someone out there could take a piece of large tissue paper and trace the board? I would gladly conpensate someone for there time. I am also up for suggestions on where I could purchase one. Thanks, Ken (kbedenb194@aol.com
 
M

Mike

Email

Ken, check your email. I sent you a message requesting your mailing address. I'll trace the board from my '84 Mac 25 and send it to you.
 
D

Dave Schiller

Mac 25 board dimensions

Ken, I see from his response that Mike is going to get you the dimensions. If you don't get them, let me know and I'll get them off my '84 Mac 25. It is too cold this weekend to go to the river (from Richmond) but I will definitely be down there next weekend and can e-mail them to you. As to parts sources, the best place I have found over the years is a distributor called Havencraft in Massachusetts. They have a website and are very helpful if you call them. Regards, Dave Schiller
 
Status
Not open for further replies.