07 H-36 Cutlass bearing

[seadaddler]

Anyone change their cutlass bearing on 07 H-36 with 1'' shaft.
I am changing the bellows on my PSS and so pulling the coupling
off some time today and even thought the cutlass is very miner play
maybe should change the cutlass bearing.
Where did you get the new bearing and what size.
Nick

 

[Jim Seamans]

Nick, call HOW. They have the cutlass for our boats. BTW its 4" long 1.25 diam for a 1" shaft. Had it in two days....

 

[seadaddler]

Thanks Jim

Sounds good and will be pulling the coupling off today if no trouble and than
the shaft should come out easy.
Everything looked real good yesterday with all bolts off and the shaft moving in and out real good and shaft look real good at the bearing and so if all is out I think I should change the bearing any way.
Going for my bicycle ride with club for 30-40 miles and on the way back will go to boat and work on it,sprinkling out side so maybe no biking and just work on boat.
No real rush and paid boat yard for month and so will take care of things need attention and wax hull after all repairs and new bottom job and back in water for New Years or Jan 5,6,or 7.
Nick