The busbar – not the wine bar! This is behind the bunk (in the wine cellar). It's where I originally had the charger mounted. I think I installed this when I was fooling around with the refrigeration and needed better connections besides the battery switch. So, I off-loaded all the connections from the battery switch to these busbars. For each positive and negative, a high load bar that feeds a lower load bar.
That's home.
The busbar – not the wine bar! This is behind the bunk (in the wine cellar). It's where I originally had the charger mounted. I think I installed this when I was fooling around with the refrigeration and needed better connections besides the battery switch. So, I off-loaded all the connections from the battery switch to these busbars. For each positive and negative, a high load bar that feeds a lower load bar.
This is in the center of the wall aft of the bunk area. It's circuit breakers, a three channel volt meter and the display panel for the charger. One of the circuit breaker shows “refrigeration”. A failed attempt at a refrigeration system. Decided it would draw to much precious energy and took it out.
I moved the charger out from behind the bunks (what we call the wine cellar). Was leery about dampness and air flow. It's mounted in the bunk area – to the back side of the wall that makes up the storage area in the head.
Under the step, the CD player and spot light. If I were to set it up now, I think I would just use an IPOD speaker base system. That way, you could plug the laptop in for movies, and not draw to much power.
Enclosed the ice box storage area, and made it an icebox. The end wall is 3/8 inch plywood surrounding a 2 inch piece of pink foam. Then coated with epoxy and painted. Surrounding the icebox underneath the cabinet is 4 inches of foam. Two blocks of ice lasts five days in the summer. After that, we eat pasta.
Navigation wall. GPS, radar and VHF. They swing out to be seen from the cockpit – but inside where it's dry, warm and happy.
M

The busbar – not the wine bar! This is behind the bunk (in the wine cellar). It's where I originally had the charger mounted. I think I installed this when I was fooling around with the refrigeration and needed better connections besides the battery switch. So, I off-loaded all the connections from the battery switch to these busbars. For each positive and negative, a high load bar that feeds a lower load bar.

There are no comments to display.

Media information

Album
H26 modifications
Added by
MABell
Date added
View count
571
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
11443-1296695355-3ae9a68e70321f10d64ef1815b9ed4e2.jpg
File size
50.2 KB
Dimensions
600px x 450px

Share this media

Top Bottom