SS thru-hull vents on port aft side for fuel tank and holding tank. Original vents were chromed brass and badly corroded. The fuel vent has a 20" rise up to the underside of the deck before going down to the fuel tank.
Installed fresh water pump on the galley sink. Serves as backup should the 12V fresh water pump ever pack it in.
Replaced vinyl access plate in arch with SS plate.
Replaced vinyl floor access plate leading to emergency rudder steering with SS plate.
SS thru-hull vents on port aft side for fuel tank and holding tank. Original vents were chromed brass and badly corroded. The fuel vent has a 20" rise up to the underside of the deck before going down to the fuel tank.
Installed taller lucite dish holder pegs to replace the original short poly ones. Tended to have dishes flying all over when heeled.
Top deck showing installation of SS cowls. The original vinyl cowls were discoloured and disintegrated after seven years.
Final inspection of the hull by the yard superintendent.
Ralph Johnstone

SS thru-hull vents on port aft side for fuel tank and holding tank. Original vents were chromed brass and badly corroded. The fuel vent has a 20" rise up to the underside of the deck before going down to the fuel tank.

There are no comments to display.

Media information

Album
1999 Hunter 310
Added by
Ralph Johnstone
Date added
View count
481
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
13907-1320130970-66d755a6725b5e99af78643b6d66498d.jpg
File size
17.4 KB
Dimensions
600px x 402px

Share this media

Top Bottom