New Shackles & Toggle Pins: The roller furling worked more smoothly when I changed the OEM shackles. Also replaced the clevis pin and split ring with a spring toggle pin at the bottom of the drum to allow quicker attachment when bending on the forestay.
New Shackles & Toggle Pins: The roller furling worked more smoothly when I changed the OEM shackles. Also replaced the clevis pin and split ring with a spring toggle pin at the bottom of the drum to allow quicker attachment when bending on the forestay.
Wide shot of outhaul hardware
Close Up of my outhaul (version 3) - I think I have it right now. I didn't want to install an internal clew outhaul as illustrated in the H15 manual because I had 'foamed' the boom along with the mast to help prevent turning turtle if/when I lay her down in a gust. There isn't much room between the clew and the end of the boom saddle and therefore to get some mechanical advantage I had to mount a second block, a cheek block, on the side of the boom and lead the line through a fairlead jamcleat.
CU Boat Vent II. Allows moisture to escape from under the cover to inhibit mildew.
Boat Cover with vents. This is a generic cover made for 4.5 meter aluminium dinghys.
I love the boomkicker! Makes it so much easier to set up and your toes don't get crushed by the boom when you drop the mainsail.
esterhazyinoz

New Shackles & Toggle Pins: The roller furling worked more smoothly when I changed the OEM shackles. Also replaced the clevis pin and split ring with a spring toggle pin at the bottom of the drum to allow quicker attachment when bending on the forestay.

There are no comments to display.

Media information

Album
H15 Mods
Added by
esterhazyinoz
Date added
View count
792
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
10476-1288024893-f5700bc03375bd8cdc6619147342b4aa.jpg
File size
62.5 KB
Date taken
Thu, 21 October 2010 12:45 AM
Dimensions
564px x 417px

Share this media

Top Bottom