I later decided to go with full sized bulkheads (so far) and this is when i sealed them with three coats of epoxy. Subseqently I painted them with off-white polyurethane.
The area under the mast ready for final sanding and paint. I repaired the core using usual the usual technique for cored deck repair but added a small elevation where the mast plate attaches.
preparing to remove the two speed winch, drum is removed. I will take this oportunity to service them.
working on the pulpit area.
I later decided to go with full sized bulkheads (so far) and this is when i sealed them with three coats of epoxy. Subseqently I painted them with off-white polyurethane.
The most controversial move yet. i will enlarge the vbirth, eliminating the forward head, and sink, and shrink the bulkheads, but reinforce with larger compression post. (advised that this compromises integrety, i later went with the original floor plan. plus my wife didn't want to give up the private head!)
the tabernacle area cut out
outer skin under tabernacle cut out showing the rot.
emergpa1

I later decided to go with full sized bulkheads (so far) and this is when i sealed them with three coats of epoxy. Subseqently I painted them with off-white polyurethane.

There are no comments to display.

Media information

Album
The rebuild Oday 26
Added by
emergpa1
Date added
View count
550
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
4717-1243448772-b7573351b2ae69bd1a3e732f3295025f.jpg
File size
43.1 KB
Dimensions
600px x 450px

Share this media

Top Bottom