DSC01477 As I mentioned previously, this hump is really the outer side of that small single sheave pocket way up in the keel slot. In the pic you can see the small S.S. back up plate with the two nuts that hold the U bolt assembly.
1986 OD 222 Centerboard I made a sketch of my centerboard when I had it out. I also posted a sketch of my friend Ray's 86 O'Day 26 centerboard on this site in the download section.
DSC01479 Here we see the two boards that cover the pipe. You can see part of the pendant line pipe in the pic. This is where I place my 50 quart cooler and also a small waste basket in the upper left hand corner in the pic.
DSC01478 This the sole plate cover in place.
DSC01477 As I mentioned previously, this hump is really the outer side of that small single sheave pocket way up in the keel slot. In the pic you can see the small S.S. back up plate with the two nuts that hold the U bolt assembly.
DSC01476 The pendant line pipe goes directly to the that hump with a short piece of rubber hose in between the pipe and hump flange. I'm wearing my slippers in this shot.
DSC01475 This pic shows the pipe heading toward the hump which is really the outer side of the pocket in the keel slot. You can also see the bilge pump inlet hose next to the pipe. I have two boards that enclose the pipe and inlet hose and this area is where I place a 50 qt cooler. Also, you can see the mount for my companionway step. I had made this step detachable to make it easer to get my cooler behind it. This was probably one of my most successful mods ever. A real work saver there never was until I came up with this brain child.
DSC01474 This is the pendant line pipe that come from the cockpit companionway step. This pipe is L shaped to provide enough space for a cooler to fit in this area of my cabin. The shape of the pipe is probably the reason for the pendant line sheave. That corrugated plastic hose is the outlet for my manual bilge pump which I've never had to use thank God. It goes to a thru hull fitting out my stern and between the rungs of my swim ladder. There's a detachable handle that is used to operate the pump from inside the cockpit.
Joe11688

DSC01477 As I mentioned previously, this hump is really the outer side of that small single sheave pocket way up in the keel slot. In the pic you can see the small S.S. back up plate with the two nuts that hold the U bolt assembly.

There are no comments to display.

Media information

Album
Removing the centerboard:
Added by
Joe11688
Date added
View count
407
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
17091-1356718019-4188c02c3e09562d7babcff01d55c448.jpg
File size
59.2 KB
Dimensions
800px x 600px

Share this media

Top Bottom