I Purchased a 1979 Hunter 25. I am looking for any documentation on the mechanics of the tiller. The tiller on this boat since I have had it is VERY stiff and requires force to be able to move it. I have asked several people and no one can figure out how to fix it. It may not be able to be fixed until it is out of the water. But I am looking for any info on the parts used for the mechanics of the tiller so we can figure it out.
Tiller for Hunter 25
- Thread starter jdecristoforo
- Start date
- Status
It is the side to side movement. Been looking for how it is all put together.
That is troublesome to hear. Since the rudder shaft goes straight down, I suspect there is an upper and lower bearing. One or both of these must need attention. I recommend you consult the owner's manual for maintenance actions.
I assume this does not have pintles/gudgeons mounted on the outside transom, but a shaft penetrating the cockpit/hull? If so, have you crawled under the cockpit (I assume the 25 has a bilge area with access under the cockpit) - maybe you can see any bearings or the shaft, see if it is bent, etc.
Thank you for your ideas and tips! I will be able to see more when I get my boat out of the water in about a month.
- Status