Hatch runners

[knotatwork2]

I have a 1987 Hunter 23 and I'm trying to find the plastic runners that the hatch slides on to open. They are about an inch wide with adhesive on the bottom to hold in place. Thanks

 

[rgranger]

I have a 1987 Hunter 23 and I'm trying to find the plastic runners that the hatch slides on to open. They are about an inch wide with adhesive on the bottom to hold in place. Thanks

If you have looked here at the SBO site and could not find them, then just email them. They have helped me find parts before.

 

[quadrille38]

If you can't find what you are looking for I have an option to consider.

On a previous boat I needed the same sliders. Picked up some of those plastic wall paper corner protectors. Took a utility knife and cut them to make flat strips. Peeled the paper off the adhesive and stuck in place. Worked great and cost all of a dollar to two

 

[knotatwork2]

Thanks for the tip. It looks like what they may have used in the first place.
Thanks Ken

 

[isaksp00]

My 23 does not have anything like that. This may be something that you have to customize/improvise as suggested above, that is, maybe there's no Hunter part number.

 

[Hunter Ad Bot]

And now a word from the sponsor...

Hunter striping decals

Vinyl striping in official factory colors for most Hunter models. Many colors and sizes in stock!
See the product