any suggestions on the best type of hose for bilge pump discharge and where to buy it?
Replacing old clear pvc with red reinforcement.
Thanks.
Replacing old clear pvc with red reinforcement.
Thanks.
searching for 1- 1/8 inch bilge hose
- Thread starter Rodd
- Start date
I got Trident HD from Mystic Marine: https://www.mysticmarinediscounts.c...rident-hose-bilge-hose-h-d-1-18-x-50-1441186/
SBO has it as well (I think they were out of stock when I needed it, or I'd have supported SBO): http://shop.sailboatowners.com/prod.php?15882
Note that it's much cheaper in a 50' box. So I'll have a little extra to clutter up the garage.
SBO has it as well (I think they were out of stock when I needed it, or I'd have supported SBO): http://shop.sailboatowners.com/prod.php?15882
Note that it's much cheaper in a 50' box. So I'll have a little extra to clutter up the garage.
That hose is not the easiest to hose clamp because of the corrugated exterior. Good hose though.
they make cuffs to go on the ends ...i haven't use them but it may well be the cure i just double clamped and have had good luck with that
Thanks guys- this is just what I was looking for-- from what I can tell most literature says cuffs are not necessary. In fact, I can't find a cuff that would fit the 1 1/8 size. I think I will try Woodster's method and just double clamp.
