All Activity
-
Sspadaforaj posted the thread looking for replacement bracket for the helm seat/swim ladder step for 2004 Hunter 41 in Ask A Hunter Owner.Hi - I've lost the pin and spring for the starboard side of this (still have the bracket but the pin is now with Davey Jones) The photo...
-
-
Ralph Johnstone replied to the thread Replacing the cutlass bearing on a 1996 Beneteau 351.Can't say as I'm not familiar with the underside of your boat. I know mine required dropping the rudder to remove the shaft and... -
Happy Birthday!! From Navy Jim... -
-
Ralph Johnstone replied to the thread Replacing the cutlass bearing on a 1996 Beneteau 351.And I'll make an even more educated guess : As far as removing the transmission I'd rather pull the shaft and rudder any day...
-
-
Oodaydokay replied to the thread Overheat adventure on 1985 Universal M12.Slick!
-
Oodaydokay reacted to jssailem's post in the thread Overheat adventure on 1985 Universal M12 with
Like.
I removed my 45 year old HE and had no issues with the bolts. Took it to a local radiator shop. They cleaned it pressure tested the... -
Keel is removed. Pin is in sad shape. Hole is still the right size in the middle. The plan is to built up the hole with weld, by... -
Joe replied to the thread Removing and reinstalling furler with mast up.:D heh, heh, xlnt point about bar and spanner tools. Good comment about trimming wire. Turnbuckle adjustment or adding longer stud could... -
Ralph Johnstone replied to the thread Replacing the cutlass bearing on a 1996 Beneteau 351.What happens to the engine when the shaft hits it ?
-
Ralph Johnstone replied to the thread New air filter completely clogged in under 20 hours!?.And so, @Project_Mayhem . What did you find ? General dirt and grime or V-belt dust ?
-
jssailem replied to the thread Replacing the cutlass bearing on a 1996 Beneteau 351.Keven. I have played with cutlass bearings. I do not clearly understand what you are facing. Can you provide images of what you discovered? -
Kkeven posted the thread Replacing the cutlass bearing on a 1996 Beneteau 351 in Ask A Beneteau Owner.My cutlass bearing top hat and about 25 mm of the cutlass Bearing rubber has moved down the shaft to the propeller.Looks like I will...
-
Yeah, and if I get prewarning of that strike, that's where I'm heading, straight to my bilge! -
shemandr replied to the thread Compression Block Replacement.Yeah but if your boat ever takes a nuclear strike that mast compression block will survive.
-
If I unsnap the aft most 3 snaps, up to the pivot, mine folds forward. It is convenient, I normally leave it down while sailing, but...
