All Activity
-
The way I've always done this is to take a photo, as you have alertly done, and then go to a marine catalog, like WM or Defender, and... -
smokey73 replied to the thread 2000 Hunter 460 propane locker replacement.I assume by "tube" you mean the insert itself. If so, you will have to fabricate (or have fabricated) something that will fit into the... -
JRacer replied to the thread Identify this deck light.Or, contact Marinebeam with the photo. Bet that they can ID it and supply a replacement. www.marinebeam.com -
smokey73 replied to the thread 2000 Hunter 460 propane locker replacement.Picture? To what tube are your referring?
-
Stu Jackson replied to the thread Identify this deck light.The way I've always done this is to take a photo, as you have alertly done, and then go to a marine catalog, like WM or Defender, and... -
Ralph Johnstone replied to the thread Pressure/Temp Audible Warning Kit.I know the fitting you mean. Oil ? I had a 1/8" NPT tap in my toolbox and threaded the BSP fitting to 1/8" NPT and called it a day... -
Richard19068 replied to the thread Pressure/Temp Audible Warning Kit.Maybe off topic here but I think some of the 5411's are raw water cooled. If so, does that mean it would need a different temperature... -
Ralph Johnstone replied to the thread Pressure/Temp Audible Warning Kit.Hopefully you're on to something. First question is "Where does that hose go to" and does it see a constant flow ? If it does, you're...
-
-
Ralph Johnstone replied to the thread Pressure/Temp Audible Warning Kit.Oh stop it, you're making me blush now. I don't understand what you meant that I meant with the word "ghost". Didn't see the word...
-
On our way out, the eagle has landed. Obviously, the eagle has taken off. -Will -
I had some G10 for my rudder post support cut and drilled by sendcutsend.com. They used water cut to shape and drill the G10 and some... -
Bbrazenarticle replied to the thread Buying and cutting G10.I had some G10 for my rudder post support cut and drilled by sendcutsend.com. They used water cut to shape and drill the G10 and some...
-
-
Uh, I think it's too late. He's already pulled the trigger.:beer: -
This is me sailing towards more financial burdens and a lot of extra labor on my end. I decided to get her after all. Wish me luck and...
-
Oh yea it’s too late. No turning back now
