All Activity
-
BBrian M H23 replied to the thread 2004 Hunter 41 Bilge Cracks.Well well well.. Pulling on the line for the galley table counterweight..as i let it drop (which would pressurize underneath it a...
-
walt replied to the thread The BMS Was Supposed to Protect my Batteries?.I think are are devices like you mentioned, whatever you put in should be able to handle the short circuit current of the solar panel... -
BI almost hate to have an answer, but are these outline cracks something to be concerned about ? I had not seen them until we had the...
-
BThat That is what I would do. Inspection is the best practice. Grounding is a grounding be it soft or a hard stop. Have you ever...
-
BBrian M H23 replied to the thread 2004 Hunter 41 Bilge Cracks.I've got similar concerns on a newish to me 1996 29.5. Has never had a dry bilge, the shaft packing, bad oring in AC raw water strainer...
-
-
Kings Gambit replied to the thread West Marine Classic Dinghy.Yeah, It's been a long time since I've seen 160 lb. I believe I was still in my 20s, etc. Good that they've (USCG) made the posting... -
I don't when the law came into effect, but the Coast Guard started requiring capacity plates on newly manufactured boats. Capacity was...
-
FastOlson replied to the thread The BMS Was Supposed to Protect my Batteries?.Reading all the replies in this excellent thread, I idly wonder how many of us are reinforced in our opinion to continue to wait to move... -
FastOlson reacted to shemandr's post in the thread The BMS Was Supposed to Protect my Batteries? with
Helpful.
Can't we just go back to Kerosine? Or whale oil? -
walt replied to the thread The BMS Was Supposed to Protect my Batteries?.Probably.. I really have no idea since the BMS tripped state over voltage spec seems to not be one that is published. Im sure the...
-
Ddlochner replied to the thread The BMS Was Supposed to Protect my Batteries?.Apparently the BMS manufacturers don't want to use a 400v MOFSET for whatever reason and prefer to use lower rated ones, probably...
-
walt replied to the thread The BMS Was Supposed to Protect my Batteries?.Im curious as to why if this over voltage that fries a BMS is important, why cant I find a spec for this voltage... FYI, here is a...
-
Maine Sail replied to the thread The BMS Was Supposed to Protect my Batteries?.The problem is not when the batt bank is at low SoC but when it approaches full. The voltage hockey sticks above HVD, the BMS shuts down... -
Ddlochner replied to the thread The BMS Was Supposed to Protect my Batteries?.If you are referring to the video posted by Rod, you missed a key point in his discussion. The BMS did not trip, the MMPT controller...
-
SSlipin Away replied to the thread Hunter 460 Companion way Sliding glass top removal..you must remove the hood
