All Activity
-
JoeWhite replied to the thread Catalina 320: Battery Voltage gauge showed the needle going past 16 volts.I would not spend any money in replacing them. The voltmeter on my car is also inaccurate. You have proven that all is well. You may... -
Does this help? dj -
I’d route it inside the lifelines, straight from the block to the clew. It might rub on the lifeline a bit on deeper reaches, but the...
-
One prep I used to do for my H356 was to move it to another more sheltered marina. And, of course, strip all the canvas off the boat...
-
jssailem replied to the thread 2004 Hunter 41 Bilge Cracks.That That is what I would do. Inspection is the best practice. Grounding is a grounding be it soft or a hard stop. Have you ever... -
jssailem reacted to Maine Sail's post in the thread The BMS Was Supposed to Protect my Batteries? with
Like.
Despite an article in Professional Boat Builder techs & DIY's are still installing 100+V arrays to batts that cannot handle more than... -
Maine Sail replied to the thread The BMS Was Supposed to Protect my Batteries?.Despite an article in Professional Boat Builder techs & DIY's are still installing 100+V arrays to batts that cannot handle more than... -
EI’d route it inside the lifelines, straight from the block to the clew. It might rub on the lifeline a bit on deeper reaches, but the...
-
Catalina 30 Groups Link Subscribe at the web forum: Catalina30 groups.io Group *All things Catalina 30 and 309! Sponsored by the... -
While there are mechanical issues, like wet decks and mold, I think the real challenge is cultural. If you look at houses as an example... -
SSFS replied to the thread West Marine Classic Dinghy.We had no issues with our Walker Bay 8. It worked better than the previous inflatable. The sail kit offered recreation at anchor.
-
Here are recent pictures of Catalina Yachts taken about a month ago. As you can see there is still severe damage to some of the...
-
jssailem replied to the thread Where's the wind?.It seems a prudent action to strip, fold and store all the canvas before the wind arrives. I’m at the boat today because I won’t have...
-
Ddlochner replied to the thread Ideal routing of jib sheet.Yes. See the photos Dave and ThinWater posted. Are you having trouble with the Genoa car maintaining its position? I ask because you...
-
thinwater replied to the thread Ideal routing of jib sheet.If wider sheeting angles are desired for reaching, either a whisker pole/reaching pole, or a second sheeting point, near the toe rail...