All Activity

  • JoeWhite
    Those are not accurate. Use digital voltmeter to measure the alternator output. It should be about 14.4 volts with engine running
  • FastOlson
    FastOlson reacted to dlochner's post in the thread Leak-Quest with Like Like.
    The balsa looks like it is sealed with chopped strand mat (CSM) and resin.
  • kloudie1
    kloudie1 reacted to BrianQ's post in the thread Possible Leaking Holding Tank with Like Like.
    While I have no direct experience removing the holding tank, I know it is possible as mine was replaced by the prior owner. I do have...
  • D
    dlochner replied to the thread Leak-Quest.
    Yes I was referring to the overhead. The brown stuff between the headliner and the cabin side does not look like wood to me, could be...
  • shemandr
    shemandr replied to the thread Project c22..
    You are active!
  • B
    Biggin reacted to dlochner's post in the thread Possible Leaking Holding Tank with Like Like.
    For future reference, if a tank is coming out of the boat and is going to be replaced it is not necessary for it to come out in one...
  • jaysweet
    jaysweet replied to the thread Leak-Quest.
    Sorry: do you mean in the overhead, or around the cutout for the portlight frame? The portlight cutout looks like raw bare wood to me...
  • D
    dlochner replied to the thread Possible Leaking Holding Tank.
    For future reference, if a tank is coming out of the boat and is going to be replaced it is not necessary for it to come out in one...
  • D
    dlochner replied to the thread Leak-Quest.
    The balsa looks like it is sealed with chopped strand mat (CSM) and resin.
  • jaysweet
    jaysweet replied to the thread Leak-Quest.
    I'm actually really curious about what the "spare wires" up in the overhead are, visible in picture #4 above. Almost certainly pre-wire...
  • jssailem
    jssailem reacted to jaysweet's post in the thread Leak-Quest with Like Like.
    So in the head ceiling, I have a winch, a rope clutch, and another rope clutch. I got the panel down that covers the head ceiling, and...
  • jssailem
    jssailem reacted to Biggin's post in the thread Possible Leaking Holding Tank with Like Like.
    Thank you folks. After a lot of squeezing, prying as it turns out it is a small leak from the hose to my 'Y' valve. BrianQ thank you...
  • jssailem
    jssailem reacted to JamesG161's post in the thread Tropical Storm Gonzalo with Like Like.
    Fish Storm.:p Jim...
  • jaysweet
    jaysweet replied to the thread Leak-Quest.
    So in the head ceiling, I have a winch, a rope clutch, and another rope clutch. I got the panel down that covers the head ceiling, and...
    • head0.jpeg
    • head1.jpeg
    • head2.jpeg
    • head3.jpeg
    • head_portlight.jpeg
  • JamesG161
    JamesG161 reacted to Biggin's post in the thread Possible Leaking Holding Tank with Helpful Helpful.
    Thank you folks. After a lot of squeezing, prying as it turns out it is a small leak from the hose to my 'Y' valve. BrianQ thank you...