All Activity
-
BigEasy reacted to Hayden Watson's post in the thread Engine went Kaput seven days into a three-week cruise. with
Like.
Now that I am home, I dug deeper into the problem and once I had the valve cover off, I found that there is a strainer inside the cover... -
Muttondressedaslamb posted the thread Quick and easy holding tank pump out device. in Marine Plumbing and Sanitation.I know this topic has come up before, but sometimes is worth repeating. As the popularity of boating has gone down, so has the... -
-
BigEasy replied to the thread Keel stud chemistry.What’s the recommended metallurgy for new studs, nuts, & backing plates? And, what is the preferred “white goop” to use? Good for you...
-
Kings Gambit replied to the thread Do I want to purchase a 275?.IMO a Newport 28 is a good alternative to your Cat 275; it’s a well-known yacht model in Southern California. Also, FYI, getting a slip... -
Ralph Johnstone reacted to Hayden Watson's post in the thread Engine went Kaput seven days into a three-week cruise. with Like.
Now that I am home, I dug deeper into the problem and once I had the valve cover off, I found that there is a strainer inside the cover... -
Ralph Johnstone replied to the thread Hoisting a San Juan 23 with keel bolts, etc…?.Depends on the diameter of the keel bolts and the weight of the boat.
-
Ralph Johnstone replied to the thread Keel stud chemistry.You can't argue with what's worked for some 40 odd years. Looks like the white goop formed an excellent seal against the intrusion of...
-
I need to get my injection pump and nozzles serviced in the western Washington. I can find two shops that specialize in this work... -
Pulled all of the old rigging off the mast today. Quite interesting how things are put together. The lower shrouds were pinned under... -
jssailem reacted to Hayden Watson's post in the thread Engine went Kaput seven days into a three-week cruise. with Like.
Now that I am home, I dug deeper into the problem and once I had the valve cover off, I found that there is a strainer inside the cover...
-
john6206 replied to the thread Dogs on board.@Mike8193 what do you clip the harnesses to? I considered the lifelines, but that seems unwise. I also kicked over the water bowl in... -
Hayden Watson replied to the thread Engine went Kaput seven days into a three-week cruise..Now that I am home, I dug deeper into the problem and once I had the valve cover off, I found that there is a strainer inside the cover...
-
I would take a look at the threads under those nuts. The threaded part projecting above the nut does nothing for strength. If the...
-
Jim Legere reacted to Maine Sail's post in the thread The BMS Was Supposed to Protect my Batteries? with Like.
The BMS Was Supposed to Protect my Batteries? In this video I explain why your PV array voltage needs careful consideration. If your... -
No doubt the PO doesn’t want to pay to store the boat for the winter if he doesn’t have too, and supposedly he found a replacement boat...
