All Activity
-
Pulled all of the old rigging off the mast today. Quite interesting how things are put together. The lower shrouds were pinned under... -
jssailem reacted to Hayden Watson's post in the thread Engine went Kaput seven days into a three-week cruise. with
Like.
Now that I am home, I dug deeper into the problem and once I had the valve cover off, I found that there is a strainer inside the cover... -
john6206 replied to the thread Dogs on board.@Mike8193 what do you clip the harnesses to? I considered the lifelines, but that seems unwise. I also kicked over the water bowl in... -
Hayden Watson replied to the thread Engine went Kaput seven days into a three-week cruise..Now that I am home, I dug deeper into the problem and once I had the valve cover off, I found that there is a strainer inside the cover... -
I would take a look at the threads under those nuts. The threaded part projecting above the nut does nothing for strength. If the... -
Jim Legere reacted to Maine Sail's post in the thread The BMS Was Supposed to Protect my Batteries? with Like.
The BMS Was Supposed to Protect my Batteries? In this video I explain why your PV array voltage needs careful consideration. If your... -
No doubt the PO doesn’t want to pay to store the boat for the winter if he doesn’t have too, and supposedly he found a replacement boat...
-
Tally Ho replied to the thread Was I lucky or what? Forestay failure!.Pulled all of the old rigging off the mast today. Quite interesting how things are put together. The lower shrouds were pinned under... -
Hayden Watson reacted to jssailem's post in the thread Engine went Kaput seven days into a three-week cruise. with Like.
A sailboat sailing skipper.:beer:
-
Hayden Watson reacted to capta's post in the thread Engine went Kaput seven days into a three-week cruise. with Like.
We lost our engine on our Pearson 530 on the first night of a 7 day charter in the Windward Islands. We completed the charter and I'm...
-
MMike8193 replied to the thread Dogs on board.We sail with a 12 year old springer spaniel. He is no problem. The most important thing is to keep him from falling off the dock or...
-
Ddlochner replied to the thread Keel stud chemistry.Cut the bad portion of the bolt off and use an impact driver to loosen the nut. There are products which will freeze the nut. Try...
-
Ralph Johnstone replied to the thread Keel stud chemistry.Can you remove the nice shiny SS nut that the PO f _ _ _ ed up the stud. That was an absolute NO, NO which caused all of that... -
A: If it still has any of the mystery oil on it, it's gonna be too slippery to grap even if you're as strong as Paul Bunyan. B: Get... -
Stu Jackson replied to the thread Starboard side bulkhead replacement.Good research, well done. From that photo in post #9, it appears that there is a wall of fiberglass behind that veneer wall in your OP...