All Activity
-
CCocoa Beach Sailor replied to the thread 37 ft cutter Rudder help please.Well I have come to a plan of action for the moment. Going to hang a small outboard off the back after I build a little transom so that...
-
David in Sandusky replied to the thread Outboard question.Because we really wanted the inboard diesel to take us on cruising legs around Lake Erie when there is no wind, we replaced our original... -
FastOlson replied to the thread Was I lucky or what? Forestay failure!.Hope you (or someone) did a mirror polish on the new SS part. -
FastOlson reacted to dlochner's post in the thread Was I lucky or what? Forestay failure! with
Helpful.
Try ZephyrWerks for the sheaves. He will make them to your specs. I bought one earlier this year. https://www.zephyrwerks.com/ -
-Will -
Spindrift NH replied to the thread Removing barnacles from CopperCoat.I use a spray bottle with vinegar. spray a few barnacles & let it work for a minute then scrape, sometimes needs a respray. It’s slow... -
When I was putting the new chain plate on today, which required the removal of 6 bolts in the anchor roller, I opened a big golf... -
Tally Ho replied to the thread Was I lucky or what? Forestay failure!.They did bend it. I don’t know about work hardening, but there some tool marks at the bends. The old one looked very similar (same... -
Tally Ho replied to the thread Was I lucky or what? Forestay failure!.Good to hear a positive comment about Rigging Only…they see,m to have the best price on a Profurl unit. thanks, Greg
-
Tally Ho replied to the thread Was I lucky or what? Forestay failure!.When I was putting the new chain plate on today, which required the removal of 6 bolts in the anchor roller, I opened a big golf...
-
kloudie1 reacted to spadaforaj's post in the thread Force 10 Oven Problem - Oven control knob won’t turn with
Like.
Thanks for all the advise. Was able to deal with it easily by just spraying some lithium grease into the valve - just removed the knob... -
JoeWhite reacted to Project_Mayhem's post in the thread Force 10 Oven Problem - Oven control knob won’t turn with Like.
I had a similar issue with a Buddy Heater. I took the valve apart, found that the part that turns had sort of seized to the body. Some... -
Don S/V ILLusion replied to the thread I have this old handheld radio.If the plasticizers are broken down, it can’t be a good sign for the life of the batteries. Mfg and age? -
shemandr replied to the thread Was I lucky or what? Forestay failure!.Good on your fabricated. Out of curiosity did they bend the SS stock? Is there a concern about work hardening? When installing I have...
-
Sspadaforaj replied to the thread Force 10 Oven Problem - Oven control knob won’t turn.Thanks for all the advise. Was able to deal with it easily by just spraying some lithium grease into the valve - just removed the knob...