All Activity
-
capta replied to the thread I wonder what he hit?.Over the years I've had numerous encounters with whales, but only one incident where I actually collided with one. I can only presume it... -
Ddlochner replied to the thread Upward bend in sanitary line.The joker valve can look OK and still be failing. The rubber (which may really be nitrile depending on the valve) and the valve...
-
jssailem reacted to Stu Jackson's post in the thread Wiring Diagram for Lithium Ion installation with
Helpful.
Here is the text of Maine Sail's article: Hitachi/Yanmar Alternators: (by Maine Sail) Some alternators though, such as those made by... -
Stu Jackson replied to the thread Wiring Diagram for Lithium Ion installation.Here is the text of Maine Sail's article: Hitachi/Yanmar Alternators: (by Maine Sail) Some alternators though, such as those made by... -
jssailem reacted to Stu Jackson's post in the thread Remote oil filer on Westerbeke M35 with Helpful.
For those of you who are not familiar with the M35, here are a series of pictures, scroll down to Replies #12 & 13 and on. The oil...
-
For those of you who are not familiar with the M35, here are a series of pictures, scroll down to Replies #12 & 13 and on. The oil... -
jssailem replied to the thread Simpson Lawrence Anchorman windlass motor.Hi @Velorosa. With a date of 30/99 on the motor, my guess is the motor is about 27 years old. I would appear that it experienced a full...
-
I just completed this project with the help of my sailing buddy Les. My Perkins engine was designed for a tractor. The installation...
-
Stu Jackson replied to the thread Remote oil filer on Westerbeke M35.For those of you who are not familiar with the M35, here are a series of pictures, scroll down to Replies #12 & 13 and on. The oil...
-
jssailem reacted to Rich Stidger's post in the thread Simpson Lawrence Anchorman windlass motor with Helpful.
The early S-L windlass' used a French manufactured motor by Leroy Somer. It was junk and many of us had brush failures. After Lewmar...
-
jssailem reacted to kloudie1's post in the thread Simpson Lawrence Anchorman windlass motor with Helpful.
Bad news. I am pretty sure that a machine shop can't help with that particular motor. Best bet would be to attempt to source a matching...
-
Could the sailor's brother have told the authorities where to look? The sailor might have reported a precise location to his brother on...
-
The saying I hear from many young folk, that elicits a "Why, bless your heart" (in my mind), is: "To be perfectly honest". Variations...
-
We stepped our mast only 1 time in 1996. As @kloudie1 says, Claude L-Auger will have the finer details. In our case, the yard used a...
-
jssailem replied to the thread Upward bend in sanitary line.When I switch from "flush" to "dry" on my Raritan PhII pump. There is still some residual water in the lines and pump that gets into...
-
