All Activity
-
Ralph Johnstone replied to the thread Keel stud chemistry.I think that's the big question here. Yes ? No ? Just out of curiosity, have you removed/replaced any SS studs to date ? How long... -
Perhaps you should look at your mast rake if the boat wanted to head down when overpowered. If the mast has too little rake the center... -
Thanks to everyone who responded. Glad to know I'm not the only one who gets nervous. As for the questions people asked - This is... -
Perhaps you should look at your mast rake if the boat wanted to head down when overpowered. If the mast has too little rake the center...
-
As a single-handed sailor, I know exactly what you're feeling. And for what it's worth, I don't think there's anything wrong with it...
-
IMHO, I wouldn’t spend a lot of time & money reconfiguring the electrical switching system. It’s simply a matter of learning how it is... -
I've sailed my '72 Catalina 22 for 6 seasons now and before that I sailed a massively over-powered sailfish my father built (so I guess...
-
Mike, No problem with the negative switch handle broken & the actual switch being continuously in on position. I always leave mine...
-
jssailem reacted to Stu Jackson's post in the thread Broken negative/ground battery switch with
Like.
Mike, glad you've found us helpful. While I don't have a Beneteau, my impression from your quote is that you may not fully understand... -
I had a new sail made a few years ago and North Sail used a larger headboard and the board hit my topping lift. I asked them to fix it...
-
Captain Larry-DH replied to the thread Don't Wreck Your current Path.Shouldn’t be a problem IF the stainless washer is beneath the nut providing mechanical compression, and is above the ring or forked... -
CCYQK replied to the thread Don't Wreck Your current Path.Maine Thanks for posting that Another valuable tip from you
-
Davidasailor26 replied to the thread Broken negative/ground battery switch.I did the shaft seal replacement this winter too, and took an approach similar to BigEasy’s. Getting the coupling off was definitely the...