All Activity
-
jssailem replied to the thread Roller Furlor binds.Unfortunately, contrary to popular belief, the lines that are on a boat when new or newly purchased are not life long attachments that... -
Greg, I have found the same. After 3 or 4 years, I have to replace my furler line. It looks ok; however, the stiffness & reduced...
-
Greg, I have found the same. After 3 or 4 years, I have to replace my furler line. It looks ok; however, the stiffness & reduced... -
BigEasy replied to the thread Roller Furlor binds.Greg, I have found the same. After 3 or 4 years, I have to replace my furler line. It looks ok; however, the stiffness & reduced... -
jssailem reacted to Ralph Johnstone's post in the thread Hunter 34 1984 Yanmar 3GMF issue with
Like.
Clogged ? Now THIS is what you call a clogged elbow : How the engine even turned over was the biggest shock. The Yanmar seemed a... -
jssailem reacted to Ralph Johnstone's post in the thread Hunter 34 1984 Yanmar 3GMF issue with
Helpful.
That has nothing to do with your siphon break but don't let that worry you. You definitely don't want to buy the exhaust manifold as... -
When you wash your line - soak with some fabric softener. dj
-
Maybe you're using too much of the wrong tape? I use plastic spreader boots like this one...
-
The line on my old furler would get stiff as it aged and got dirty. Thought the furler was the problem, until I put a new furler line...
-
jssailem reacted to Don S/V ILLusion's post in the thread Where to buy Vinylester Resin? with Helpful.
This is a sample of availability in the US. I’d be surprised if it’s unavailable in AU.
-
jssailem replied to the thread Cabin waterleaking.When I see a hole like that, perfectly formed, I wonder why it was put there. Plugging it is the last thing I want to do. It may be a...
-
fix one leak and find three others.....:laugh:
-
This is why they say "The idea is to keep the water outside the boat!"
-
The line on my old furler would get stiff as it aged and got dirty. Thought the furler was the problem, until I put a new furler line...
-
OK all. I checked the fairlead and think I found part of the problem. So re rigged it at a better angle As for a clean line I checked...