All Activity
-
Sure looks like snake oil. Nothing in their technical justification looks like it supports their claims... But what do I know??? dj -
Davidasailor26 replied to the thread Electric toilet.Correct that you won’t need any kind of intake loop anymore, and a cap on the seacock would be best practice. You will still need a... -
JamesG161 reacted to thinwater's post in the thread Smelly water from hot water heater, burns eyes when showering (Peggie still here?) with
Like.
With slight paraphrasing, this is the bleach treatment that a few have referenced above. It's from ANSI for RV and similar. The RV code... -
A hose clamp or a zip tie makes a good guide to get a straight cut -
kappykaplan replied to the thread Heaving to.If at first you don't succeed . . . Congratulations! :beer: -
My boat came with them. They were green with growth and I wasnt terribly confident that the elastic straps would hold it in place over a... -
Ralph Johnstone replied to the thread Cabin waterleaking.Hey @Perphoto Canada . Haven't heard from you in a while and thought I'd see how the photos are coming along. Just a suggestion, but... -
Rick Webb replied to the thread Mast foot ripped just about off H26.A hose clamp or a zip tie makes a good guide to get a straight cut -
Hello all, I’m done with rubber spreader boots that are a pita to remove, retape. In my area (pnw) I’m starting to see spreader boots...
-
Ccolemj replied to the thread Active cooling Cryo paint on decks?.Does that fan in the hatch have saw blades to keep things interesting? It doesn't precess hanging from a strap?
-
jssailem reacted to thinwater's post in the thread Smelly water from hot water heater, burns eyes when showering (Peggie still here?) with Like.
With slight paraphrasing, this is the bleach treatment that a few have referenced above. It's from ANSI for RV and similar. The RV code... -
BigEasy replied to the thread Starboard Bulkhead Replacement.Very nice results! -
I didn't have the option to order a fabricated bulkhead when I removed and replaced both a on a different make/model several years ago...
-
shemandr replied to the thread Starboard Bulkhead Replacement.I was going to recommend ML Condon for a question about plank material on another thread. But I wasn't sure if they were still...
-
IIndysailor replied to the thread Starboard Bulkhead Replacement.I didn't have the option to order a fabricated bulkhead when I removed and replaced both a on a different make/model several years ago...