All Activity
-
David in Sandusky replied to the thread What are you doing for JACKLINES?.Our jackline is the port bowline led by the mast, over the cabin to a pad-eye mounted on the forward wall of the cockpit on the right... -
Bbrazenarticle replied to the thread Instrument/Nav network primer.Beware! What starts as a simple quest to "see messages and devices on the network with a computer or app" can become a deep dive into...
-
Hey everyone, problem solved! it’s been a long day. 16 hours ago we were pulling out of the harbor when I noticed the problem and... -
If that just happened when you crancked the engine this morning I would check to insure that water is flowing through the seacock...
-
eherlihy reacted to Don S/V ILLusion's post in the thread Water not flowing out of exhaust with
Like.
What engine? Hours? Age/condition of thermostat? Have you checked its operation? -
fred1diver replied to the thread Gin pole issue.If I understand correctly, it is sliding up? Why not use the other halyard that is attached to the lower cleat, either get more loose on... -
fred1diver replied to the thread Sheet track stopper Q’s.I was planning on reusing the old ones, as far as I can see they seem to be the same material/metal. I will look more into it before I...
-
Tally Ho replied to the thread Sheet track stopper Q’s.If they are dissimilar metals (track and stopper) it could be corroded together. Are you planning to reinstall the stoppers? You may... -
BigEasy replied to the thread Diesel fuel can for boating.I listen for the fuel to start accumulating in the onboard filler hose. A fuel dock attendant taught me that trick many years ago. I... -
fred1diver replied to the thread Adding turning blocks at mast base.I did look at the Garhauer site today for plates, with my type of mast step, there are not many options, but I did find what I think...
-
-
I am to remove the stoppers on the end of my tracks, but even after taking the screw off, it will not budge, could it have fused/welded...
-
-
john6206 replied to the thread Water not flowing out of exhaust.@Project_Mayhem I did it all from the topside of the seacock. @jssailem Most of the Great Lakes are pretty deep with no weeds near... -
Jim Legere replied to the thread Diesel fuel can for boating.I don't generally fill the diesel tank at a fuel dock and this thread is about filling from jerry cans. I have used this filter funnel... -
Captain Larry-DH reacted to Tally Ho's post in the thread Instrument/Nav network primer with
Helpful.
Hey Dave, Not sure if this anywhere on target for what you are looking for, but I wanted to use a Raspberry Pi (RPI) as a below deck... -
Davidasailor26 reacted to Project_Mayhem's post in the thread Instrument/Nav network primer with Like.
Thank you for the info. I've seen your project in the past. It's really impressive!
