All Activity
-
You are not missing too much without the bow thruster. As others have noted, the boat turns on a dime. Which can be a blessing or a... -
BigEasy replied to the thread Age 80, O'Day 26 CB, great loop.Ralph, Did the same a few years ago, refusing to pay outrageous price for sailkote. BUT, I did a side by side comparison test on a... -
Yes. That. And I would guess you might have just a few extras. Sometimes the reason for being a "good Samaritan" is enlightened...
-
Thank you, I was looking to confirm what you said before I went at it. Hopefully I will have time tomorrow to try and remove them...
-
YouTube is your friend. Search on st4000 and you will get some video and see the insides.
-
Ddlochner replied to the thread Javelin ! saturate before using :.That is an unusual arrangement. The tabernacle part should be relatively easy to find, it is used on a number of different boats. Your...
-
-
CCalif. Ted replied to the thread Disassemble ST4000 MK2 wheel unit.The bearings are held in a very lightweight black plastic matrix, I pulled one apart to discover the plastic had broken and the bearings...
-
Cutting the mast and raising the mast foot is likely to create issues with the mast raising system as the pivot point is also going to... -
kloudie1 reacted to Project_Mayhem's post in the thread Disassemble ST4000 MK2 wheel unit with
Like.
Yep! That's what I was referring to. Thanks for the help! -
Indysailor reacted to rgranger's post in the thread Mercury Very high revving at Very low throttle? (small outboard) with Like.
A high engine rev. is a sign of running lean (oxygen rich) so "gunk" in the fuel system is a likely suspect. Let me ask a question... -
Rick Webb replied to the thread Mast foot ripped just about off H26.Cutting the mast and raising the mast foot is likely to create issues with the mast raising system as the pivot point is also going to... -
Ddlochner replied to the thread Javelin ! saturate before using :.This looks like a keel stepped mast. What is the "submast" you're referring to? On deck stepped masts there is a compression post...
-
Ddlochner replied to the thread Lowering the table in a Hunter 39.There may be some corrosion on the base or the legs restricting movement. Bring some PB Blaster and apply it to the legs at the base and...
-
LakeOntario270 reacted to Benny17441's post in the thread Spare dockline when you're away with Like.
Spare lines? I live my lines behind at the dock when I go sailing. They are tied to the dock cleats at the just the right length... -
I did a video on overhauling my old RM wheel pilot several years ago….maybe this will help (sorry…it is a long one) Greg
