All Activity
-
I've been toying with the idea of 120vac cooking run from a portable power station of around 2500 continuous watts. The power station... -
Agreed, but is probably why they aren't used more. Double crimp terminals are really the best choice for a boat, as they crimp the...
-
jssailem replied to the thread Unconventional Deck Fuel Fill Installation and Bed-It Tape.Looks like it works. Try a plastic scraper like this to remove the excess back to the edge of the cover.
-
-
You can also test that the shore side pump is working by placing the pump hose in a pail of water or stick it in the water next to the boat. -
I had an intermittent situation where I could not pump out my Hunter 380 holding tank. It mystified me for years. I finally cut an...
-
Oh, THAT edge. What you're looking at there is called welting, or piping. Here are some examples -
sailcapt340 replied to the thread Unconventional Deck Fuel Fill Installation and Bed-It Tape.Greg, it is through bolted. I also thought getting it to compress was going to be my issue as well, being a horizontal mount. But I... -
-
sailcapt340 replied to the thread What size handle for Whale pumps?.I was out on my boat today and remembered to get you some pictures of my Whale MK3 Gusher Pump. A different model than Gregs but may...
-
-
Richard19068 replied to the thread Hond BF5A... Sat 4 years... Got a few questions. Need little help..If you have a endoscope that would fit in the spark plug hole you might be able to take a look and see if there is any rust, major... -
GeorgeC replied to the thread Holding tank won’t empty.You can also test that the shore side pump is working by placing the pump hose in a pail of water or stick it in the water next to the boat. -
GeorgeC replied to the thread Holding tank won’t empty.The screens in the metal vent fittings for the water tanks and waste tanks clog up with corrosion. You can try using a garden hose to...
-
Johann replied to the thread DC induction cooktop.I misread you were looking for an inverter/charger. The specs on that 1200VA inverter look pretty good for a microwave drawing <1100W. -
I had looked at the Multiplus compact before I got my IP22 chargers but I just do not have enough room anywhere close to my batteries...
-
Ccolemj replied to the thread Terminal connectors.Agreed, but is probably why they aren't used more. Double crimp terminals are really the best choice for a boat, as they crimp the...
-
Ccolemj replied to the thread Hunter 340 factory non skid deck re-do.To me, your deck looks like the factory applied grey gelcoat in the mold in the non-skid areas, then sprayed the entire mold with white...
