All Activity
-
-
Leeward Rail replied to the thread 1988 C22 waste basket.The originals were made by Rubbermaid. Mine had a Rubbermaid sticker on the outside with a part number. Unfortunately I don't own the... -
BigEasy replied to the thread 1988 C22 waste basket. -
BigEasy replied to the thread What would YOU have done?.I don’t know that I would have done anything differently than you did; however, many years ago when I took an ASA course, the instructor...
-
Stu Jackson replied to the thread What would YOU have done?.Good report, glad you're OK and found the issue. I'm sure you always have a bailout backup plan, and your options seemed reasonable... -
I was taking my 1988 O’Day 322 out for a sail yesterday. Light winds, but I was hoping to make a go of it. I got the boat ready, and... -
-
Gene Neill replied to the thread Bulkhead Vinyl bead trim.Oh, THAT edge. What you're looking at there is called welting, or piping. Here are some examples -
Gene Neill replied to the thread 1988 C22 waste basket.It's been five or six years since I did an exhaustive search, but I never found one that would fit. Our boat still had one when we...
-
Stu Jackson replied to the thread DC induction cooktop.A ddg search on "How to size an inverter" found this one, among dozens of others. I know your application is a boat, and why you are...
-
thinwater replied to the thread McMaster for rigging pins?.^^^ In general, I would be MORE confident re. McMaster Carr than West Marine and so forth. If you need technical specs, they have them... -
Don S/V ILLusion replied to the thread H260 long foam noodle bumper/fender, fm front to back, anyone else tried.famous last words -
Johann replied to the thread DC induction cooktop.I think this would be marginal. The continuous power rating at 25C is 1000W but my 3kVA Multi will heat up pretty quickly so I use the... -
Ccolemj replied to the thread DC induction cooktop.I think your problem is the modified sinewave inverter combined with lead batteries. We have a 1100W microwave/convection oven running...
-
Dalliance reacted to azambella's post in the thread H-33 Chrrubini Bow plate/Mooring chocks with
Helpful.
The Plate at the bow of our Hunter 33 has broken and despite a number of repair attempts, Continued to get destroyed by mooring lines... -
Ralph Johnstone replied to the thread Lowering the table in a Hunter 39.Maybe start by removing all four screws in each of the two conical cover plates (top and bottom), remove the assembly and see what's... -
