All Activity
-
jssailem reacted to JRacer's post in the thread Recently aquired 1992 First 38s5 and I probably need some advice... with
Like.
Glad to be of assistance. Rule is, complete one project, add two more to the to do list!:biggrin: -
I have used both cheap crimpers and cheap connectors. I found that it's better to use good connectors with cheap (properly adjusted)...
-
jssailem reacted to Jan_H's post in the thread New Owner - Purchasing a 310, survey says moisture and delamination in rudder with
Helpful.
David Walker at Foss Foam told me that they made Hunter rudders from 1978 to 1995, when Hunter took over making thier own rudders until... -
JRacer replied to the thread Recently aquired 1992 First 38s5 and I probably need some advice....Glad to be of assistance. Rule is, complete one project, add two more to the to do list!:biggrin: -
JJan_H replied to the thread New Owner - Purchasing a 310, survey says moisture and delamination in rudder.David Walker at Foss Foam told me that they made Hunter rudders from 1978 to 1995, when Hunter took over making thier own rudders until...
-
My inverter is a Magnum 2812. 2800w continuous. You should not show that much (92A) at the battery when drawing 700 watts. Amps x... -
eherlihy reacted to Project_Mayhem's post in the thread Has anyone replaced their domestic water piping? with Like.
There's a gentleman on here with a Catalina 310 or 320 that redid his plumbing within the past year. Unfortunately I can't recall his... -
Davidasailor26 replied to the thread DC induction cooktop.I think Gemini got it right though. The cooktop is alternating current, but at a very high frequency. An AC cooktop first rectifies the... -
Rick Webb replied to the thread I need a boom for a H26..Most likely you are looking for this one: Boat Information | U.S. Spars -
eherlihy replied to the thread Replacing ALL of the plumbing.I posted this in the O'day Bigger Boats sub-forum yesterday, and somebody pointed me here. I just bought 100' each of red and blue...
-
-
At the risk of running afoul of Mr. Lochner, seeing as you are still in the learning phase of tubing installation, you don't want to use...
-
Better yet, color code the PEX, Red for hot water, Blue for cold, and white for supply from the water tanks to manifold or pump. Also...
-
eherlihy replied to the thread Has anyone replaced their domestic water piping?.You're right. - I think that when I posted the AI stuff, my question was overwritten. My question is whether anyone here has done...
-
eherlihy reacted to kloudie1's post in the thread Has anyone replaced their domestic water piping? with Like.
In my humble opinion, the whole PB thing is a bit overblown. Of course, the safe thing is to replace it but most of the failures in PB...
-
There are also mid-grade (semi-commercial) cooktops that will vary the output 800-1800W and use a switch mode below 800W. Changbert is...
