All Activity
-
Stu Jackson replied to the thread Excessive? counter force on throttle (inboard Yanmar 3GM30F).It is almost never the engine end, but rather right in the Edson unit. There are throttle friction adjustment screws(s). Edson's... -
HHello everyone. Does anyone have specific knowledge of how the chainplate attaches to the "bulkheads" (Knees) below? i see the large...
-
-
jaysweet replied to the thread AC Ground Leak - Measuring.I'm pretty ignorant about stray current issues, but I've always used 2 egg-shaped zincs on my 1" prop shaft and I used to see them... -
BigEasy replied to the thread How do you know if my anode needs replacement?.My understanding is to replace the anode when it becomes 50% depleted. That being said, monitor your waterline for signs of excess... -
BigEasy reacted to jssailem's post in the thread How do you know if my anode needs replacement? with
Like.
The only way I know to check the anode without diving under the boat or hauling the boat up on shore is to use a silver/silver-chloride... -
Ccolemj replied to the thread S1 Wheel Pilot conversion.The tiller pilot is definitely not what you want to install there. It is as weak and slow as the wheel pilot and won't gain you...
-
Stu Jackson replied to the thread Anchorages and hiking trails..Hayden, please don't overwhelm yourself. When I lived in SF my in-laws moved to Vancouver Island from Toronto, and they bought a small...
-
Ccolemj replied to the thread Has anyone replaced their domestic water piping?.I also think the worry over PB is overstated. Our previous boat came from the manufacturer with PB and Qest fittings. All of their...
-
Ralph Johnstone replied to the thread Anchorages and hiking trails..I know, I know. But "sometimes" he's a nice guy. -
Stu Jackson replied to the thread Happy 80th, Joe!.any number you like. Remember, kids, when you thought anyone past 25 was old...??? Heck, who'da thunk any of us would get this old...
-
CCurwen reacted to Denis Schmider's post in the thread Hunter 260 Outboard Control Cables Replacement with Like.
I did lift the whole floor section with the pedestal attached, when I replaced the throttle cable several years ago; that was a pain. I...
-
CYeah, I'm definitely gonna pass on this one. I was just wondering if it's a common modification. I know some have had issues with the...
-
C:plus: To this I would only add that if the previous owner thought mortar in the ballast tanks was a good idea, he might have made...
-
CI could write several paragraphs explaining why this is a disaster waiting to happen. For starters, this boat could not be safely...
-
CI had an H26 (same hull). You also have the gally on Starboard. I ended up moving my batteries to the port side and my heavier stores...
